Australia Wide Shipping

eSUN ePAHT-CF(Nylon Carbon Fiber)

$114.95

Description

The ePAHT-CF (nylon carbon fiber) is a material jointly developed by eSUN and LUVOCOM.

Compared with PA66, the size and electrical properties of ePAHT-CF are less affected by humidity and temperature. The strength of ePAHT-CF is higher than other eSUN nylon series products. The surface of the printed items is matte and fine. On the basis of the performance of PA6, 15% high-rigidity carbon fiber is added, high-strength, high-rigidity, impact resistance, self-lubricating and abrasion resistance, excellent chemical resistance, high temperature resistance, the continuous use temperature of the parts can reach 150°C, and the short-term use temperature can reach 180°C. It can be detected by metal detector (≥ 2 mm³). Compared with pure nylon, the shrinkage rate and water absorption rate are greatly reduced. The printed model has high dimensional stability, good mechanical performance, good interlayer bonding, excellent printability, low distortion, no warping, and no chamber or bed heat is required.

 

PRODUCT ADVANTAGES

High strength, high rigidity, the strength is much higher than other eSUN nylon series products
Excellent chemical resistance
High temperature resistance
High dimensional stability
Excellent surface effect
Excellent printability, good interlayer adhesion, no warping

 

PrECAUTIONS

ePAHT-CF is easy to absorb water, please dry before printing (70℃/12H). It is recommended to use with eSUN eBOX when printing. ePAHT-CF is very easy to grind nozzles and extruder gears. It is recommended to use hardened steel nozzles or ruby nozzles. Hardened steel extruder gears can be selected if possible. If the throat printing time is long, it needs to be replaced. It is recommended to use with eBOX and ruby nozzle together.

1 in stock